Krylon matte finish aerosol spray 11oz
Make a wig less shiny
2023.06.01 12:12 jenhairvietnam Make a wig less shiny
If you're dealing with a shiny wig, don't worry – there are some simple ways to reduce the shine and make it look more natural. Here are a few methods to make your wig less shiny:
Dry shampoo: This will help to absorb excess shine and create a more matte appearance. Spray a generous amount of dry shampoo onto the wig, focusing on the shiny areas. Gently massage the dry shampoo into the fibers and then brush it out.
Baby powder: Similar to dry shampoo, baby powder can also help to reduce shine. Lightly dust the wig with baby powder, concentrating on the shiny areas. Let it sit for a few minutes, and then gently brush out the excess powder.
Matte finishing spray: If the above methods don't provide the desired results, you can try using a matte finishing spray specifically designed for synthetic hair. Follow the instructions on the product to apply it to your wig.
By trying one or more of these methods, you should be able to reduce the shine on your wig and create a more natural, realistic appearance. Remember to always handle your wig gently and follow the manufacturer's care instructions to keep it in the best possible condition.
" Although shiny wigs are appealing, do you find it annoying that an excessive amount of shine can make the wig, especially the synthetic one, look unnatural? Have you not managed to seek an easy guide on how to make a wig less shiny?
Today, we have listed out a series of tips along with step-by-step instructions to help you learn how to take the shine off a wig. What we illustrate is applied for the synthetic wig and even the human hair wig if necessary.
Are you ready to appreciate a gorgeous wig?
Let’s dive deeper into the following article right now!"
https://jenhair.com/how-to-make-a-wig-less-shiny.html #JenHair #JenHairVietnam
submitted by
jenhairvietnam to
u/jenhairvietnam [link] [comments]
2023.06.01 01:24 bula0814 Best/most durable paint for indoor plastic chairs?
I have some dining room chairs that have wooden legs and a white plastic seat (unfortunately I can't post pictures as per the sub rules).
I'd like to paint the seat portion black but seeing as these will be getting used quite a bit, I'm wondering what the best paint would be.
I know that realistically I'll probably have to touch it up if the paint gets scuffed up over time but I'd like to have it last as long as possible.
Someone recommended Krylon Fusion plastic spray paint and I'm wondering if anyone has experience with this or if there's something better I can use?
Also is there a particular finish that would make the finish last longer or hide scratches better?
submitted by
bula0814 to
HomeImprovement [link] [comments]
2023.06.01 01:10 Mkplover [SELL] [US] Lots of brand new & Gently used items! KVD, Urban Decay, Too Faced, Hourglass, Jeffree Star Cosmetics, Tarte, Wander Beauty and etc.
submitted by
Mkplover to
makeupexchange [link] [comments]
2023.05.31 23:37 herecomethehighstepp another ad from the attic
2023.05.30 20:39 yiffcuresboredom Interior Damaged at glass shop.
Bought a new car, (financed) and the windshield broke from a small rock within ~1k miles. I went to a glass shop to have it replaced.
When they finished with my car there is white fingerprints which seem like wet paint all over the interior and airbag covers, black leather. I don’t know what the substance is.
I immediately asked them to look at it and they shop workers tried to use some solvent aerosol sprays and rubbed the fabric and leather until it was damaged.
There is about 20 separate locations with these fingerprints including the edge of the windshield.
The shop says they don’t have anything white that could do this, but the employee telling me this had it all over him. They agreed to replace one of the two damaged airbag covers and nothing else.
I didn’t agree to the partial repair work because I felt like they were negligently damaged car in the last two attempts.
I filed a separate claim with my insurance and let then know their recommended shop did this damage.
Anyone in the glass industry know what the white substance could be or how to handle this with the shop?
submitted by
yiffcuresboredom to
AskMechanics [link] [comments]
2023.05.30 00:43 hannuhhuhhoney Today’s BBQ Look
| Hello! Here is my makeup for my family Memorial Day bbq. Had fun with a pink and teal color combo to match my shirt and eyes! This is my first post on this sub, love seeing everyone’s looks, creativity, and fave products :) Products used - I put a star ⭐️ next to my holy grail products Brushes: * Morphe cosmetic x Jaclyn Hill - JH08 (mini kabuki brush) * ⭐️Real techniques setting brush * Eco tools small lip brush Face Primer: * ⭐️e.l.f. all the feels facial oil * Aveeno positively radiant daily moisturizer spf 30 Base: * Maybelline fit me concealer - mixed shades 10 fair & 25 medium * ⭐️Maybelline instant age rewinder - shade corrector * Milani cheek kiss liquid blush - shade berry smooch * ⭐️Anastasia Beverly Hills Pink Passion Blush Trio - shade Rose * Beauty Bakery setting powder - shade Oat (translucent) * Nose highlight - KVD Vegan Beauty Dazzle Stick - shade hail surge * Milani make it Last setting spray - original natural finish Eyebrows: * e.l.f. clear brow and lash mascara * Maybelline express brow pencil - shade 260 deep brown Eyes: * Anastasia Beverly Hills Pink Passion Blush Trio - shade Rose applied lightly in crease * Wing - L’Oréal infallible grip precision felt eyeliner pen - shade 620 green * Tight line and lash line - Maybelline tattoo studio gel liner - shade deep teal * ⭐️Inner corner highlight - KVD Vegan Beauty Dazzle Stick - shade hail surge * ⭐️Maybelline rocket volume express mascara - shade blackest black Lips: * ⭐️Maybelline super stay matte ink liquid lipsticks - mixed shades poet and artist to get a light nude pink * Cupids bow highlight - KVD Vegan Beauty Dazzle Stick - shade hail surge * ⭐️Fenty beauty gloss bomb heat - shade Fu$$y heat submitted by hannuhhuhhoney to MakeupAddiction [link] [comments] |
2023.05.29 19:21 No-Voice896 Createx wicked matte
I'm painting a scale car body and it has matte and glossy parts next to each other.
Can I paint the main color of the matte parts and then paint the matte without taping off the main glossy body. Then after tape that finished area off and cover the matte with the main body color that will be glossy?
Here are the colors- Underside plastics - black matte Main body - glossy silver
I feel it would be easier with less moving the tape back and forth by just not worrying about covering the silver glossy areas with matte but I'm worried the silver paint will not look the same or not adhere to the matte paint the same.
Am I overthinking this and just paint the black bottom and matte with no tape then cover all that up and finish the silver glossy after or should I tape off all areas that the silver would be and make sure no matte gets on those areas before I spray the silver?
My main process would be as follows: 1. Black bottom side color 2. Matte top coat 3. Tape off bottom side 4. Silver main color 5. Glossy final coat 6. Remove tape
submitted by
No-Voice896 to
modelmakers [link] [comments]
2023.05.29 18:34 Frank_Leroux Molossus, Chapter Fourteen
First Chapter Chapter Thirteen Chapter Fifteen Corporal McCoy had figured out the best reason for getting in good with an udhyr. They had four arms, therefore the hugs were twice as nice. They now lay in her room, with him lying on her bed and her lying on top of him, with her ensconced in the aforementioned hug-squared. She’d been able to get ahold of her Switch, and at the moment was in the midst of some happy early-morning gaming. Takh’s head rested upon hers with a gentle and welcome pressure while he watched her play. By now she was so used to him that even the little random clicks of his mandibles didn’t cause her any fear.
She was still trying to figure out if she and the alien XO were an ‘item’ or not. Zawahir had, with his usual enthusiasm, explained to her that both the udhyr and knuall-toua were pretty much like humans, with equal numbers of both males and females who reproduced sexually. He hadn’t gone into details on how exactly Tab A fit into Slot B, but the overall idea was clear. The auhn were a little more complicated; the ratio of females to males was more like seven or eight to one, plus there was the added wrinkle that the males were non-sapient and about as smart as the average pet dog. That had resulted in a very matriarchal society, of course, one based around clans of females protecting their stable of fertile males with appropriately auhn-like ferocity. The spider-like xyrax were…well, both. Completely hermaphroditic; there was quite a complicated social dance before they reproduced as to who was going to bear the resulting egg. McCoy was sure that, however it worked out, it would look adorable.
“So this Kirby can eat anything?” asked Takh, breaking into her ruminations.
McCoy tapped at her controls on autopilot, hoping that the damned thumbsticks wouldn’t break. Again. “Yep. Fun fact, waaay back in the 80s, Nintendo got sued by Universal Studios, who claimed that Donkey Kong was a ripoff of King Kong. John Kirby was the attorney who successfully defended them in court, and in gratitude they named this character Kirby.” She continued her tapping. “I think they gave him a sailboat as well.”
“Mmm, I must admit a sailboat sounds nice right about now. This place is very nice, but it’s a bit too cold.”
She wriggled against him. “You said it. You and me, off the coast near Nice? Floating in the warm azure waters of the Mediterranean? I can wear a nice little bikini I’ve got saved up for just such an occasion.”
“Oh! Uh, well, yes. That does indeed sound quite nice…”
She grinned. Takh was a dork, but a giant lovable dork and it was always great to get a reaction like this out of him. Even if it didn’t lead anywhere
there. As far as she knew, the udhyr reproduced like frogs. Maybe she should discreetly quiz Zawahir on the whole Tab-A into Slot-B thing, just to make sure she wasn’t setting herself up for disappointment.
Of course, she’d just managed to get to the final boss of this particular level when the siren howl of the alarm went off. Haley McCoy blinked as she went from supine four-armed cuddling to standing in an instant, placed upon the floor by Takh’s upper arms.
“The unholy hell?” she muttered, but she was already in motion as she sprinted towards her gear, laid out so as to ensure maximum efficiency in getting it all put on. “Takh?” she called out as she started strapping her armored vest on.
“Yes? What do I do?”
“Simple. Anyone comes through that door who you don’t recognize, kill ‘em.”
“I…I don’t know, I’m still understanding how different humans look from each other, I don’t want to make a mistake.”
“You’ll know,” she said with finality as she picked up her carbine and racked the slide. “Okay. Follow me…”
The door to her room smashed in as a figure clad in black armor came through screaming “Earth belongs to HUMANS!...”
That was all he got out before Takh grabbed the man’s head and simply hurled the offending figure over McCoy and into the far wall. The window set in that wall shattered with the resulting impact, making the corporal duck.
“Fuck me, Takh.” She looked at the broken figure of the oh-so-very dead intruder, then back up to the worried-looking XO. “I mean, not literally. Okay, well you can if you want to, and I for sure would like you to…you know what? Let’s put that whole discussion off to the side for now until we can sit down and have ourselves a nice long chat, okay?”
“That sounds like a very wise strategy, Haley. What do you need from me?”
She finished putting on her headset and helmet. “Right now? You need to stick right behind me while I get you to the bunker.”
“You want me behind you?” Takh’s mandibles quirked in a grin. “That sounds like a very nice place to be.”
“Stop distracting me, you giant dork.” McCoy moved towards the door with a grim set to her shoulders, ignoring the lovely fact that her alien maybe-boyfriend was now checking out her ass. She swept the outside hallway….nothing visible. Then she heard some commotion from off towards the kitchen area.
__________
Martinez surged to his feet upon hearing the alarm, his half-eaten horizontal-cut pimento sandwich now forgotten. “What the fuck…?”
Matt was on his feet as well, with a strange look in his eyes that the corporal had never seen before. “You two. Corner. Now.” He pointed at the corner farthest from the two entrances to the kitchen.
The corporal was on the smaller side, even amongst his fellow humans, but something in the Marine’s tone made him turn and tackle the huge alien. Kexal, to his credit, somehow knew that Something Was Up and accepted the tackle, otherwise there was no way in hell that Martinez could have moved the giant creature.
Just as he did so, he caught a glimpse of a dark form, clad in full armor, holding a rifle, gliding around one of the entrances to the kitchen. In a panic, he fumbled for the pistol at his hip.
Martinez prized himself on his reflexes. But still, he had time for one blink of astonishment as Toke all but teleported himself across the ten feet of intervening space, pushing the intruder’s rifle up towards the ceiling and out of battery as his own arm flashed in a wicked arc. The corporal caught the merest glint of a small but cruelly-curved knife, like a predator’s claw, in the Marine’s fist.
There followed quite the epic spray of blood from underneath the attacker’s armpit, followed up by a few more cruel swipes which made sure that the tendons in that shoulder were destroyed and useless. Toke pulled the rifle away from the now-dangling limb.
Somehow, the black-armored attacker managed to speak in spite of what must be massive pain. “Earth will NEVER submit to…”
Toke’s voice was as hard as granite. “Tell your shit to someone who cares.”
Two more vicious swipes across the man’s throat resulted in a cascade of crimson down his black-armored front, and the would-be assassin toppled to the wooden floor.
“Martinez.” Toke’s robotic voice shocked him back into awareness.
“Y…yeah?”
“Got a pistol?”
“Of course.” He checked to make sure that he had it in his hand. Huh, that was strange. He didn’t remember drawing it, but there it was.
“Good.” The lean man tossed the purloined rifle towards Martinez, who caught it automatically in his off-hand. “Take this. Check this dead motherfucker for extra mags, and take ‘em. You’re on Kexal, understand? Get him safe to the bunker. Anyone you don’t know personally comes at you, you shoot ‘em.” His black, mechanical gaze shifted towards the alien. “Kexal? If Martinez goes down and someone attacks you, you have my permission to yank their arms off.”
The giant planetologist stared in horror at the bleeding and probably-dead sapient before him, then shook himself. “Of course. Yes. I’ll protect myself.”
“No need,” said Martinez as he looked back at his newly-christened charge. He racked the action on his just-acquired rifle, which looked to be a standard AR-platform civilian carbine. The corporal wished for something full-auto, but this was at least better than a pistol in terms of range and punch. “I’ll get you to safety, sir.”
He turned back to ask Matt just what the fuck was going on…but he only saw empty air.
__________
Cécile Savoie was not having a good day. She’d accepted the position of overall chief of security at Camp David with delight…at first. Dealing with the day-to-day of protecting one of the most targeted people on the planet, that she could deal with no problem. Because it was one person. It was an unspoken agreement between all of the agents that SAILOR was the priority. Even the First Husband could be sacrificed if need be.
But then she’d had a bunch of damn aliens dropped in her lap, along with an equally weird group of special-forces types. The latter were what really ground her gears; the aliens were genuinely nice and apologetic about being such a bother, but the human soldiers were the types who would crash on your couch, drink all your beer, and then steal your sweetheart when you weren’t looking.
She crouched behind a little berm to the west of Camp David, the other members of her patrol stretched out alongside her in a roughly north-to-south line.
“Moseby! Report!” she yelled.
She heard a few thumps, then a few cracks in her earpiece which were followed up by echoing reports from the building behind her. Thankfully she heard her agent’s voice in her earpiece.
“Shit! Wow, um, you’re really good with that knife…” She then heard a muffled phrase that sounded a bit like ‘give it to me, son’, and the next voice in her ear was one she was unfamiliar with.
“This is Captain Matthew Tocco, USMC, whom am I speaking with?” The voice sounded as if generated by an AI.
“I’m Agent Savoie,” she responded. “I’m in charge of the Camp David security detail, who are you?”
“I just told you who I am, Agent Savoie. And I just saved the life of one of your agents. Now. Let’s cut through any sort of jurisdictional bullshit. We have at least two confirmed active hostiles in the complex, two more are confirmed down. We’re sweeping the compound to make sure there are no others, plus making sure that our esteemed guests are safe inside the bunker. Where are you located? We need to coordinate our defenses.” The information made her see literal red. The attackers had made it into the compound? How? There must be some angle, some safe passage made by somebody. She was going to find out who had made that safe passage, and those people would burn. Oh yes, they were all going to burn…
“West of the complex,” she snapped. “We’ve set up a perimeter along the ridge there.”
“Got it, Agent Savoie. Oh, and please don’t shoot me when I show up.” She ran through various scenarios for the next few minutes, trying to figure out who on the team had betrayed them. And there must have been such a betrayal in order to get armed hostiles into the actual buildings. Her further musing upon vengeance was cut short as a tall, lean man seemed to all but materialize next to her. He held a small, curved blade in a reverse grip in his right hand; that blade dripped red blood. She almost pointed her gun at him, then relaxed. “Captain Tocco, I presume?”
“Call me Toke.” The guy sounded like he was out for a day on the beach.
“Who the hell are you…wait, you’re with the group in there, right?”
Matt nodded. “Yep. The rest of us are in there bundling up our guests and making sure they’re all safe and sound. Actually, by now Corporal McCoy should be…”
Agent Savoie flinched again as a small but very stacked woman seemed to suddenly appear like condensing smoke at her other side, out of the brush. “Speak of the Devil, and she shall appear.”
The tall man grinned at her. “You are pretty damn good, corporal.”
“Hell that means a lot coming from you, Toke. By the way, that’s a nice kerambit. Anyways, everybody on Team Alien is tucked in and unharmed. I got Takh in there fine. Martinez even tagged a couple more bad guys while he was escorting Grakosh to the bunker. Fair warning to everybody listening on this channel, he’s gonna be aaaall sorts of smug about that and it’s gonna turn into a story of taking out four dudes before this week is out. But, right now, it looks like only four of the OPFOR made into the complex…however they did that…so the rest must be out there.” She pointed towards the leafless woods beyond the little rise.
“Any word from Shaw?” asked Toke.
Savoie narrowed her eyes. “Something bad happened in DC. Sounds like an artillery or mortar attack.”
“Shit.” McCoy looked troubled. “This is serious business, then. State player?”
“Maybe,” said Toke. “But it could be some private group with some proper funding behind ‘em. Agent Savoie, do you have any word of a helicopter or plane going down nearby?”
“A Chinook,” she replied, “Went down about thirty minutes ago thataways.” She motioned to the west, out into the wintry forest. “Then we had one of our patrols out in that direction go silent. That’s what triggered the alarm.”
Matt grunted. “Yeah, that’s how I’d do it. Make it look like a crash and infiltrate that way. Right.” He touched his ear to make sure his earpiece was seated. “You just keep this channel open, right?”
“Where are you going?” asked McCoy.
“Out there. You need eyes on assholes, and I’m gonna give that to you.”
McCoy tossed him her carbine. “At least have a gun on you, dude.”
He caught it with his off-hand, since his main hand still held the dripping-red kerambit. He grinned at her. “All right. You got a pistol?”
“Of course.” She pulled it out and racked the slide.
He tossed the rifle back to her. “Give me that instead. We’re gonna need to concentrate some proper firepower here. This might be a proper light-infantry invasion in progress. We need to organize ourselves into a skirmish line running along this ridge, south-southwest to north-northeast. Get whoever you can on your team in there out here to bolster our firepower, understand? Dig in.”
“Got it.” The little corporal’s eyes blazed with purpose as she handed her pistol to Matt. “Now go get you some.”
“Believe me, I will.”
Savoie blinked in astonishment as the tall man vanished again.
“Yeah, he kinda does that,” said McCoy. “Dude could give sneaking-around lessons to fucking Batman.” She pulled a map out of one of the pockets on her cargo pants. “Now, Agent Savoie, how many people do we have available? Let’s get ourselves properly set up.”
__________
Wade stepped carefully over a fallen branch, his boots making almost no noise at they met the soft mulch covering the forest floor. From the curt statements in his headset, it sounded like the four heroes who’d been infiltrated into the devil’s nest had been cut down. There was no word yet if any of the alien menace had been eliminated. That was a shame, but hopefully it drew attention away from his own unit. He and his comrades made up the secondary and much more armored thrust, one which not even the vaunted Secret Service could counter. The latter were armored, yes, but only armored against pistols and they only wielded pistols themselves. He and his team had rifles, level-four body armor, helmets, and most importantly proper communications.
A voice crackled in his ear.
“Hold position. The security detail is forming into a defensive line. It looks like they know we’re here.” “Set timer?” Wade whispered into his headset. His team had a set time to accomplish their mission, before the entirety of the United States military-industrial complex landed upon their heads like the proverbial Wrath Of God.
“Yes, set timer. Twenty minutes.” There was a soft chorus of
“Twenty minutes, aye,” in Wade’s ear as he tapped his own smart-watch to start the timer. “Twenty minutes, aye,” he murmured. As he made to step over another downed branch, he paused.
Something was off. He couldn’t say why, but the air itself seemed a little more still than it should be. He turned to his left and saw a blur heading for him…he tried to raise his rifle, but it was too late…
__________
Cécile Savoie’s head snapped up as she heard a few cracks from the treeline which could only be the sound of firearms. “Anyone see anything?” she whispered into her earpiece.
There followed a myriad of
“No, ma’ams” in her ear. “Keep a sharp eye,” she murmured. “Don’t fire on anyone not in black. We do have a friendly out there, he’s supposed to be giving us intel…”
Matt’s voice sounded in her ear.
“Indeed. Bagged one of ‘em, on the outer edge of the advancing force. Looks like civvie gear, carbine is only semi-auto. This is a well-funded civilian effort, not a state actor.” She checked her watch. “Got it. Fifteen minutes until we get backup in place, what do you need from us?”
“Hmm, that explains the ‘twenty minutes’ thing. Right, they know they’re on a timetable. You all need to be, and I hate to put it this way, the meat shield. It looks like they’re going for a solid push towards you, no stealth. Fourteen hostiles all told, and if this guy’s gear is any indication they’re all up-armored. Class Four. Center of mass is no good, go for head or limbs.” Savoie’s mouth was now dry. “Understood.”
“Don’t worry, Agent. I’ll be behind them, and I’ll do what I can to sow some dissention in the ranks.” __________
“Wade, report!” hissed Horace into his microphone.
No reply.
He took in a breath to issue another demand when a voice sounded in his ear. Horace had once gone swimming in the ocean off of Florida, and had by pure chance come across a great white shark. He still remembered the vacant gaze of the giant predator, who was probably idly wondering if Horace would make a good snack for today.
This voice brought up once again that dread; it was the voice of a pure predator.
“Who is this?” “Who the fuck are you?”
“The one who just took down…Wade, was it?” “Sidney, get eyes on Wade!”
“Will do…” There followed a long, long silence before that shark-like voice spoke again.
“You just got Sidney killed too, asshole. Care to keep going? I got no problem with that. Or do you all want to call this a day? You can do that too, you know.” “Everybody down!” Horace snapped before going prone himself. That taunting voice still sounded in his ear.
“Okay, now you’re all down and less of a target. What now, genius? You got…hmmm…about twelve more minutes before all of the backup in the world arrives. And they will find you. You know what? You’d better hope they find you instead of me. Because I give less than two shits about that whole ‘Geneva Convention’ crap.” “Maintain radio silence,” said Horace, as he tried to wriggle his way forward.
“Oh, you’re still trying, Mister Leader? How cute. Let me put it this way to you fourteen…sorry, thirteen, assholes. You’re done. Nailed. The best you can hope for is to get some lawyers who want to make a name for themselves. Worst case? You get put in a room with me, and if you have any sense in what passes for your brains you will spill your guts. If I’m honest, I kinda hope you put up a brave front and don’t say anything. It’s been a very long time since I got to cut loose. Gotta keep up that certain set of skills, yanno what I mean?” “Maintain radio silence,” grated Horace, as he continued to wriggle forward.
Then, all of a sudden, he realized he was looking at boots. A pair of boots, planted in front of him like a goddamn World War Two commando movie. He glanced upwards, hoping against hope that it would turn out to be a gag like that one comedy where it was just boots…
No.
It wasn’t just boots.
Horace looked up into a man with the eyes of a shark, as well as the quite threatening muzzle of a pistol.
“Hey there, my Little Buddy-O,” said Matt. “Whatcha doin out here?”
__________
Milton came to with a gasp. “Shaw…”
A gentle hand laid upon his shoulder. “Shh, dear. He’s fine, everyone’s fine.”
He gazed up at the white-tiled ceiling above him. “But…” He turned to look into the face of the one person he loved above all else…well, her and Johnny. “He’s okay?”
“He’ll live. Just like you. You big doofus.” Teresa leaned forward to kiss his forehead. “I saw the footage. You threw yourself at all of those senior citizens, which might just count as assault with a deadly weapon. Then you went and managed to get all the way across the stage towards Sadaf. You really don’t know when to give up, do you?”
“Guess I don’t”, he chuckled, then glanced down at his arm. His former arm. “Whoof. That medic was really quick with the tourniquet, I’ll give him that.”
“With you and with Sergeant Shaw,” said Teresa. By now she was pretty much clambered on top of him, tucking his big head into the nape of her neck; it was his favorite place to be. He inhaled her scent with relish, before suddenly realizing someone was missing.
“Johnny?” he asked.
“Oh, right,” she said, before making an imperious snap of her fingers to someone out of his line of sight…right before a little ball of energy burst its way into his room.
“DADDY!” yelled the little firebrand, before smacking into his side. Milton hugged them both to himself, realizing that, no matter what happened next, he was right now in the best place possible.
“Keep it all down to a dull roar, okay?” said a voice off to his left. A very recognizable voice.
He picked his head up to stare in that direction. “Shaw?”
The sergeant gave him a casual wave from his own hospital bed. “Hey, slick. Good ta see ya up and about.”
Milton grinned. “You too, you old fart.”
“Aw hell, I ain’t that old. So. Just out of curiosity. Did that torniquet on your arm hurt like hell?”
The agent cuddled his son closer. “You better believe it.”
“Okay, got it. Just for reference, if you get one on your leg it also hurts like a motherfu…uh, hurts like crazy.”
Milton winked at Shaw. “Don’t worry, my son has heard worse. Why are you here?”
“They put you both in one room,” said Teresa. “Something about it being easier to guard. There was an assault on Camp David too, from what I’ve heard.”
“What?” Milton tried to pry himself up off of the bed before getting a mutual shove-down from his wife and son.
“Relax, my man,” said Shaw. “Toke was there. He and my peeps took care of it.” The sergeant looked at the acoustic tiles above him. “Gonna have to promote McCoy and Martinez. They both really stepped up to the plate.”
__________
President Correa rubbed at her temple. “This ‘Toke’ is a menace.” She was seated behind the famed ‘Resolute’ desk while still trying to show the appropriate deference to the barrel-chested man in front of her, clad in a crisp dark-blue dress uniform.
“Let’s be fair, ma’am,” replied General De Vries, “He helped this situation become less complicated, not more. None of our alien…refugees? I suppose that’s a good a term as anything. None of them got killed, hell none of them even got injured. We collected the thirteen of those remaining while trying to assault Camp David. Overall we have ten dead, including the four who somehow made it into the complex and the Secret Service patrol. The attackers had top-of-the-line gear, civilian but first-rate.”
She slammed her fists into the desk-top, making a nearby mug filled with coffee jump. “I fucking VACATION there, General! Me and my family, understand?”
“I know, ma’am. Do you want me to do this questioning…properly?”
She somehow picked up what he was putting down. “No. You have my permission to go off the chain.”
“Then consider me and Toke off the chain, ma’am.”
“Wait…you’re going to use him?”
“He has had experience in similar matters, ma’am. If you prefer, I don’t need to use him.”
She shook her head. “No. We need intel, and fast, on how the fuck this happened. Plus not to mention we somehow had an artillery attack in the midst of goddam DC.”
“I cannot speak for the FBI,” said De Vries with deceptive calm. “But believe me, we will find out how this all happened. And it will never happen again, of that you have my solemn word.”
The president slumped in her seat. “What about those injured in the DC attack?”
“It was a precision single artillery strike, ma’am. Probably GPS or maybe laser-guided, we’re still trying to figure out which. If Sergeant Shaw hadn’t intervened as he did, Captain Sadaf would be nothing but pulverized meat right now.”
She looked up at him with a cynical quirk to her eyebrow. “Did his saving her get caught on film?”
“Oh hell yes. Footage from several phones, it’s all gone viral.”
“Good, make sure it continues to go viral. How is Shaw? And Agent…um…sorry, my brain is going twelve different ways…sorry, Agent Milton Vila, right?”
“You are right, ma’am. Both are still in the hospital, under guard of course, but both are stable. Milton lost an arm, and Shaw lost one of his legs below the knee.”
“Fuck.” It was one of the rare times that De Vries had heard the president swear. “Both can be helped with prosthetics, right?”
“Not my area of expertise, ma’am, but yes. They’ll both live, and we’ll make sure they have the very best technology available.”
President Correa suddenly grinned with an expression that the general somehow knew was going to lead to Complications in his near future.
“You mean the best human technology, don’t you?” she asked, with deceptive calm.
“Well…yes, of course. I mean, Zawahir Ibn Harith is still trying to make sense of how the aliens heal themselves. It’s true regeneration, if I understand it right. Damage to the central nervous system is still kind of hard for them to deal with, but otherwise they can pretty much heal anything.”
The president examined her fingernails. “So…growing back a limb or two should be the proverbial walk in the park, yes?”
“Um…” The general’s eyes widened. He now realized why this unassuming lady had won two terms to the highest executive office in his particular country. “Oh, yes! Of course!”
“The plans for repair efforts on the
Rithro have costs which are already pretty much alongside the Manhattan Project,” said President Correa. “Why don’t you appoint Zawahir as the lead of this particular effort? We’ll call it Manhattan-Light.” She fixed General De Vries with her eyes. “Imagine it. Two people, grievously wounded in the line of duty while protecting one of our alien refugees, an effort which was caught on multiple cameras…imagine them then walking out onto a stage with intact limbs.”
“It will make quite the photo op, ma’am.”
“Indeed. I’m glad we understand each other, General.”
submitted by
Frank_Leroux to
HFY [link] [comments]
2023.05.29 17:58 No-Voice896 Createx wicked matte
I'm painting a scale car body and it has matte and glossy parts next to each other.
Can I paint the main color of the matte parts and then paint the matte without taping off the main glossy body. Then after tape that finished area off and cover the matte with the main body color that will be glossy?
Here are the colors- Underside plastics - black matte Main body - glossy silver
I feel it would be easier with less moving the tape back and forth by just not worrying about covering the silver glossy areas with matte but I'm worried the silver paint will not look the same or not adhere to the matte paint the same.
Am I overthinking this and just paint the black bottom and matte with no tape then cover all that up and finish the silver glossy after or should I tape off all areas that the silver would be and make sure no matte gets on those areas before I spray the silver?
My main process would be as follows: 1. Black bottom side color 2. Matte top coat 3. Tape off bottom side 4. Silver main color 5. Glossy final coat 6. Remove tape
submitted by
No-Voice896 to
ModelCars [link] [comments]
2023.05.29 17:32 No-Voice896 Createx wicked matte
I'm painting a scale car body and it has matte and glossy parts next to each other.
Can I paint the main color of the matte parts and then paint the matte without taping off the main glossy body. Then after tape that finished area off and cover the matte with the main body color that will be glossy?
Here are the colors- Underside plastics - black matte Main body - glossy silver
I feel it would be easier with less moving the tape back and forth by just not worrying about covering the silver glossy areas with matte but I'm worried the silver paint will not look the same or not adhere to the matte paint the same.
Am I overthinking this and just paint the black bottom and matte with no tape then cover all that up and finish the silver glossy after or should I tape off all areas that the silver would be and make sure no matte gets on those areas before I spray the silver?
My main process would be as follows: 1. Black bottom side color 2. Matte top coat 3. Tape off bottom side 4. Silver main color 5. Glossy final coat 6. Remove tape
submitted by
No-Voice896 to
airbrush [link] [comments]
2023.05.29 12:58 rsinternationalbath The Benefits Of Upgrading Your Bathroom Faucet: Style, Functionality, And Water Efficiency
| RS International. Replacing the tap is an excellent idea to give your bathroom some flair and practicality. Changing the old fixture with a new one might significantly impact whether you’re remodeling your bathroom entirely or just want to make a minor alteration. In this article, we will get to know the advantages of replacing your old tap and provide guidance on choosing the best manufacturer of bathroom shower in india. Why Bathroom Renovation Is Necessary Several factors necessitate bathroom remodeling. One advantage is that it can raise the value of your house. For prospective buyers, a well-designed and modernized bathroom may be a significant selling feature, especially if it has high-end fixtures and finishes. A refurbished area can also improve daily life by enhancing its usability and comfort. Even minor adjustments might have a significant impact when remodeling a bathroom. Changing the tap is a simple and budget-friendly method to give your space a new look and enhance performance. Here Are Some Tips For Picking The Right Lavatory Faucet. Style As fixtures are available in a wide range of designs, you may choose a bathroom sink faucet that complements the layout and finish of your washroom. There is a tap that will suit your aesthetic, whether you choose a sleek, minimalist appearance or a more classic one. Selecting a new bathroom tap might be an opportunity to modernize the decor of the lavatory as a whole. You might wish to select a tap with a distinctive shape or finish that matches your current fixtures or prefer to change all of the fittings at once to achieve a uniform appearance. Functionality Upgrading the bathroom faucet can also improve its functionality. For instance, choose a tap with a higher spout if you routinely wash your hair in the sink, or prefer a tap with a single lever that is simple for young children. Along with the spout height and handle type, there are more functional aspects to consider when choosing a bathroom tap. For example, some faucets include a pull-out spray head that makes rinsing the sink or washing your face easier. Others may include a touchless sensor that lets you turn the water on and off without touching the faucet. Water Efficiency Water efficiency can be increased by replacing the bathroom tap, which is an additional advantage. Many newer faucets are designed to use less water than earlier versions, which can help you save money on your water bill and lessen your environmental impact. Consider models that have received the WaterSense certification when selecting a bathroom tap. The Environmental Protection Agency (EPA) sponsors the Water Sense program, which certifies items that use less water. Compared to older taps, which have the highest water consumption of 2.2 gallons per minute, WaterSense faucets are meant to use 1.5 gallons per minute. Budget Establish a spending limit for the new tap and select a model that fits your price range. Remember that higher-priced faucets often come with additional features and a longer lifespan. When making a choice, consider the faucet’s longevity and long-term value. Installation When selecting a new tap, consider the ease of installation. You may be able to set up the tap yourself if you have some basic plumbing knowledge. However, hiring a professional plumber is essential to ensure a safe and proper installation if you’re not confident performing plumbing work or if your bathroom contains complicated plumbing fixtures. Choose the Right Finish The finish of the faucet will impact the overall look of your bathroom. Choose a finish that completes the decor and matches your existing fixtures. Popular finishes include chrome, brushed nickel, oil-rubbed bronze, and matte black. Check the Warranty Make sure to check the warranty before making your purchase. A good guarantee will protect you against defects and ensure the faucet lasts many years. Look for a warranty covering parts, labor, and the finish of the faucet. Frequently Asked Questions How do I select the ideal bathroom faucet for my requirements? Consider style, use, water efficiency, installation, and price when selecting a bathroom tap. Choose a fixture that suits your toilet style, has the required functions, is water-efficient, is simple to install, and falls within the price range. What finishes are available for bathroom faucets? Bathroom faucets are available in various finishes, including matte black, brushed nickel, and chrome. For a unified aesthetic, pick a finish that blends in with your lavatory’s style and current fixtures. In Conclusion Upgrading your bathroom faucet is a smart investment to improve the overall lavatory style and water efficiency. You can enjoy a more comfortable and eco-friendly space by choosing a high-quality faucet that includes all qualities. When considering your options, check out the wide range of RS International, which offer style and functionality for any bathroom. submitted by rsinternationalbath to u/rsinternationalbath [link] [comments] |
2023.05.28 03:53 voidrobot Small haul!
2023.05.27 19:23 rachel17017 Half and half foundation try on and trying a few other new products for my dry skin
| Here are my mini reviews of everything new I tried. My skin is super dry and pale so I try to stick with creams and dewier products. Anything without a review is already a tried and true favorite. Face * Primer: Touch In Sol Glassy Skin Balm * Foundation: right half is Revlon Illuminance Skin-Caring Foundation in 109 Light Ivory and left half is Beauty Blender Bounce Skin Tint in Light 2 * On initial application, the beauty blender skin tint had more coverage and was slightly more matte and skin-like whereas I had to put on two layers of the revlon foundation to get the same coverage and it was VERY shiny. In the end I think I got them both to look similar with my setting spray but I like the skin tint more for the coverage and skin-like finish. * Concealer: Nars Radiant Creamy Concealer in Light 1.25 Affogato * This creased on me way worse than my normal concealers (Maybelline Age Rewind and Hourglass Vanish Concealer) but the coverage and finish was nice. * Under Eye Powder: Kosas Cloud Set in Airy * I usually use the Hourglass Veil Translucent Setting Powder and that really blurs and sets. I have dry under eyes and I could pack on the Kosas powder over and over and it never looked caky and gave a nice blurring finish. I’ll have to try it again with a different concealer though to see its setting power. * Blush: Kaja Whipped Dream Eye & Cheek Color in Meringue Pink * I piled this on and it kept blending out flawlessly. It has a little less pigmentation than my other blush favorites like Rare Beauty Liquid in Adore and Glossier Cloud Paint in Puff which makes it beginner friendly so it’ll always blend and you kinda can’t mess it up. * Bronzer: L’Oréal Infallible 24h Fresh Wear Bronzer in 200 Fair * Seems like a typical blendable powder bronzer. * Highlight: Ofra Cosmetics Highlighter in Glazed Donut * Lipstick: Maybelline Super Stay Vinyl Ink in Fearless * Setting Spray: Peach & Lily Glass Skin Veil Mist * This made the foundation melt really nicely and look like skin and gave me a nice dewy finish. It’s now my new favorite setting spray. Eyes * P Louise Eye Cosmetic Base in Rumour 1 * Elf Bite Size Eyeshadow Palette in Truffles * Rare Beauty Perfect Strokes Universal Volumizing Mascara in Black * I love this mascara on everyone else but it just clumps weird and makes my eyelashes droop. I’ll be going back to my Ilia Limitless Mascara. submitted by rachel17017 to MakeupAddiction [link] [comments] |
2023.05.27 10:30 neverninetofive Spray painting Surron parts with spraybike: Battery
Hey guys!
I'm thinking about customizing some parts of my 2023 surron with some spray paint I purchased here:
https://spraybike.us/collections/all-colors The company offers special bike spray colors that can be applied without priming so very easy to use on metal/plastic/aluminium/carbon parts and you can also get matte/glossy finishes. Fenders shouldn't be the problem as they are plastic anyway and I can easily replace them if it looks shitty.
But did anyone of you have tried to spraypaint the battery? I'm running stock battery rn. My plan is to wrap up the bottom and top of the battery with tape, then color the main "body" of it. Any concerns or things I should keep in mind?
Nike did a really sick looking custom surron with a german artist called BSTN (The one in the image) so if you like to dive into that build:
https://www.bikeexif.com/sur-ron-bike-custom He also painted the battery I think but I don't know if you have to apply anything else to make it "safe" because of the cells inside?!
submitted by
neverninetofive to
Surron [link] [comments]
2023.05.27 09:54 Mechanikool8 Battlefield 2042 inspired paint job for the UTR45
| Gave the UTR45 a new paint job. Inspired by the 'Spiker' skin for the PBX-45 in Battlefield 2042 (see last photos). Took me about 8 hours from start to finish as the original RIF was two tone. Used rubbing alcohol and fine grit Wet and dry paper to remove the original blue (Patrol Base done a good job with the original two tone so this took a while to remove). After this I used grey primer, khaki, matt green and brown spray paint from Halfords UK (two coats of each) and finished it with a lacquer and some brown electrical tape. To get the solid camouflage effect I masked off the areas with Frog Tape and cut these out with a sharp Stanley knife. submitted by Mechanikool8 to airsoft [link] [comments] |
2023.05.26 13:37 Juelzmain22_ Back to Mac
| I have been ABSOLUTELY OBSESSED with Mac makeup. So here’s a full face of Mac with some additional products. Seems like A LOT of products, but light layers strategically placed gives a very smooth, fresh, not heavy face of makeup. (Also sorry, no face picture attached this time 😬) Mac fix+ Mac Studio fix mattifine shine control primer Elf halo glow filter tan/deep Mac Pro longwear nourishing waterproof foundation NC50 Mac Studio tech cream to powder foundation NW60 Lys cream blush confident Mac matte rich rosy bronzer Haus labs bronzer deep level 10 Dior forever skin correct concealer 4.5N Mac Studio fix 24hr smooth wear concealer NC44 Laura mercier translucent loose powder Mac Studio fix pro set + blur powder dark Morphe filter effect powder filter4 Mac mineralize skin finish Cheeky Bronze Haus labs blush watermelon bliss Mac x Whitney Houston extra dimension skin finish Just Whitney Mac contemplative state paint pot Mac Pro eyeshadow uninterrupted Mac singles (natural wilderness, soft brown, espresso, Swiss chocolate) Mac costa riche eye liner Mac extra dimension eyeshadow Havana Mac fix+ stay over setting spray Mac lip liners Chestnut, Cork Mac x Whitney Houston lipstick Nippy’s moody nude Mac lipglass beaux submitted by Juelzmain22_ to makeupflatlays [link] [comments] |
2023.05.26 08:06 Entire_Fun_8371 How to make Mac fix+ matte spray a dewy finish spray
2023.05.25 14:00 dreftzg [Daily News] Massena LAB Launches A Very Attractive Mathey-Tissot Mergulhador, Unimatic Takes Inspiration From Tuscan Olive Fields For Series 8 And The Crazy People From HYT Are Back With A Quirky Rainbow Hastroid
It's Thursday and there are some very weird watches out today.
What's new
1/ Massena LAB Launches the Mathey-Tissot Mergulhador, a Follow Up to Last Year’s Type XX Chrono William Massena, owner of Massena LAB, is increasingly profiling his collaborations with watch companies in two directions - either super high end or accessible. Now, we’re getting the latter. Massena LAB has teamed up with the old, discreet and relatively unknown outside of watch circles brand Mathey-Tissot to recreate Mathey-Tissot’s Mergulhador Skin Diver and recreate it into a slightly more modern package.
This is not the first time Massena is working with Mathe-Tissot, as they introduced a pair of limited Type XX chronographs, which were an instant and somewhat unexpected hit. Those watches were inspired by a watch in Massena’s personal collection, and that’s also the genesis of his latest project bearing the Mathy-Tissot name. This time, the watch in question is the Mergulhador Skin Diver, a watch that you’d be forgiven for being enamored with based on name alone. “Mergulhador” means “diver” in Portuguese, and as you’d probably guess, the original version of the watch was marketed to the Portuguese market in the 1970s, and was aimed at both military and civilian customers. It’s a bit obscure, but that’s what’s fun about it, and why it makes sense for someone with Massena’s knowledge and background to bring it to a larger audience.
The star of the watch is the dial, an amber fumé that looks like it’s been exposed to the elements on a divers hand for years. The amber complements the bright orange hour markers and an orange minute track against a black background that feels right out of the 1970s. The dial also features oversized white lume plots at each hour, the size of which is certainly in keeping with the general 1970s aesthetic.
The stainless steel case is pure skin diver, measuring 41mm in diameter and 12.8mm thick, and with a cushion shape. The steel bezel rotates in both directions. While this is not be common on modern divers, it was on pretty much every single recreational skin diver in the 70s. Inside is the reliable Sellita SW200 and it gets a 36 hour power reserve. The watch comes on a choice of a black rubber or black calfskin strap. Water resistance is rated to 200 meters.
Want some bad news? Only 99 will be made and it seems that they have all been sold out. However, the Massena LAB website does allow you to join the waitlist for this watch, so who knows - they might make a new run? Highly unlikely, but one might hope. If you could get it, it would cost you $995.
2/ Unimatic Takes Inspiration From Tuscan Olive Fields For Series 8 Limited Edition Unimatic is one of those brands you either like or hate. Yes, people will dislike it for some pretty serious quality issues when the brand started, for their pretty strong marketing game or will argue that they are overpriced for what you get. I can understand all of those criticisms, and more. But I like them. They’re fun, quirky and are great summer watches. If you can get one for EUR 500, it’s perfectly fine value for money. However, their prices might vary depending on model and limited status.
Also, I also very much appreciate their collaborations, special editions and new models. Now Unimatic has a new limited edition series of the Modello lines in a gorgeous olive color that the brands says pays homage to Tuscany. All of the models get an olive dial and fantastic creamy markers and hands, as well as olive straps. It’s all very olive here and it’s called the Series 8, applied to four of the Modello models.
Staying true to the familiar style that has marked the Modello Uno, the U1S-80 features a 40mm case with relatively short lugs. It’s the closest to a dive watch that Unimatic makes, so it makes sense that it is water resistant to 300 meters and has a mono-directional safety bezel. However, here form coves over function as it is the most minimalist of bezels, so not very useful for diving.
Then there’s the U2S-80, the new version of the Modello Due, the brand’s field watch. As such, it’s smaller than the diver and very retro. Inside the 38mm case is the automatic caliber Sellita SW200-1b which gives it a hacking second, reminiscent of vintage field watches. The Modello Tre is a combination of a tough chronograph and a rugged dive watch. The U3-80 is an Olive drab rendition of Unimatic's chrono-diver and has a singular subdial at the 9 o'clock position as everything about this brand is minimalist. The U3-80 is the largest watch in the lineup, measuring at 41.5mm including the bezel, and is also the only quartz-powered watch in the series, opting for the Seiko Meca-Quartz VK64A.
The U4S-80, or the Modello Quatro, is definitely the most minimalistic of all the watches. It takes the dive watch model of the Modello Uno and strips it of all functionality by giving it a fixed steel bezel. And it looks even better with the olive green dial and strap.
Each model of the Unimatic limited edition Series 8 will receive a production run of 400 units and each watch ships with both an olive drab two-piece TPO strap and a seatbelt NATO strap, as well as a Unimatic Tough Case for two watches.
The U1S-80 will cost you EUR 925, the U2S-80 EUR 750, the U3-80 EUR 625, and the U4S-80 EUR 750. All of these prices are without tax and the watches can be ordered now.
3/ The Crazy People From HYT Are Back With A Quirky Rainbow Hastroid HYT has a complicated story. It made outrageous watches that polarized the community. Some argue that the watches were too out there and that there is not a big enough market for them. Those people might have been right, as HYT went bankrupt in 2021. But only a year later later, the brand is revived and it’s return is marked by the Hastroid, a watch with familiar mechanics and the HYT signature move - using fluids to display time. HYT has always been known for bold designs that incorporate flashy colors. Now they go a step further with all the colors of the rainbow on the HYT Hastroid Rainbow.
The HYT Hastroid Rainbow comes with all the features of the existing Green Nebula, Supernova Blue or Cosmic Hunter models. Measuring 48 mm in diameter and over 17mm in thickness, it has a length of 52mm. The case’s multi-layer “sandwich-like” construction also integrates cut-out areas on the sides with grilles. The dial and display have also been redefined with more depth and a complex multi-part structure. Composed of 43 components, the dial has an openworked, textured structure revealing most of the mechanical elements, and both the mechanical section (on top) and the fluidic section (the bellows on the lower part and the capillary tube around the dial) are entirely visible.
Powering the HYT Hastroid is the calibre HYT 501-CM. Made of two separate modules connected by a lever, the upper side is dedicated to timekeeping and is a hand-wound movement running at 4Hz with a power reserve of 72 hours. It is also the driving force for the fluidic indication, giving its power and delivering a constant displacement to act on the motion of the fluids, thanks to an oversized lever and a curved feeler-spindle. This sensor transforms the circular motion of the movement’s wheels into a linear motion that pushes the bellow.
That’s all that remains the same. For the Rainbow, HYT has gone all out on color. The case is made from multi-layer carbon fibre with a profile in matte black DLC-coated titanium. It is worn on a bright, bold purple rubber strap with black inlay. The rainbow effect is applied to the dial’s grille using tinted Zapon lacquer. Each dial is individually executed by Yan Patriarca, a lacquering expert. Each colour is sprayed by hand, in several layers, and with an imperceptible gradient effect. In addition, the fluid contained in the capillary tube is black, and when it moves around the coloured dial, it gives the impression that it is tinted in the shade assigned to each time slot.
The HYT Hastroid Rainbow is released as a limited edition of 15 pieces and priced at CHF 75,000 (excl. taxes).
4/ New Porsche Design Chronograph Is Exclusive To Owners Of The718 Spyder RS Contrary to popular belief, Porsche Design is not a subsidiary of Porsche, the car manufacturer. Yes, it is owned by by Porsche SA, the holding company, but
technically, the folks over at Porsche Design don’t go around designing Porsche cars. Porsche Design was founded in the early 70s by Butzi Porsche, grandson of Ferdinand Porsche with the idea of creating a Porsche boutique that would create car-themed accessories. Pretty soon, Porsche Design started making watches and the popped up on the radar of both watch lovers and car lovers. So it only made sense for Porsche Design to start making car inspired watches to satisfy this desire from customers.
Porsche Design is still doing the same to this day. And their latest watch is an exclusive one that can only be purchased by owners of the just announced 718 Spyder RS, the car that inspired the watch. The concept of owner-exclusive watches is nothing new for Porsche Design, as they have made watches for and inspired by the 718 Cayman GT4 RS, the 911 GT3 RS and the 911 Dakar.
The base of the watch remains the same as the aforementioned models (save for the Dakar watch, which uses a different base watch), meaning Chronotimer Series 1 architecture, a watch that pays tribute to the earliest models created by the Butzi Porsche in the early 1970s, with a proprietary automatic flyback chronograph movement. The case, made of lightweight bead-blasted titanium, meadures 42mm in diameter, with a height of 14.6mm. You can get it untreated or with a black titanium carbide coating, just like you can get the bezel in natural or black-coated titanium, with either a tachymeter or a 60-minute scale.
The dial retains the classic architecture of the collection and offers a wide range of personalisation options. First, the individual colour ring around the dial can be chosen in all available Spyder RS standard, metallic, and special colours, but also in the 114 additional colours of the paint to sample programme. Then, the dial itself can be chosen in classic matte black or in genuine carbon fibre. Three styles of hands complete this wide range of options, with Performance (white), Essence (black) or GT (yellow) options.
Under the hood is the calibre WERK 01.200, a highly modified Valjoux base, now chronometer-certified and equipped with flyback function. The final touch comes from the oscillating weight designed to look like the wheels of the Spyder RS. Two designs are available – following the look of the classic wheels or the optional lightweight magnesium alloy wheels of the Weissach package – and available in all colours from Porsche – Brilliant Silver, Aluminum satin, Dark Silver, Neodyme, Indigo Blue, and Black. You think that’s a high level of customisation? Yeah, you can also get the VIN of your 718 Spyder RS engraved onto the rotor…
The watch comes on a leather strap with black Race-Tex inlay and Spyder RS logo embossed, and a titanium bracelet can also be specified. If you’re a owner of the new Porsche 718 Spyder RS, you can get your watch now at a starting price of EUR 9,500.
5/ Singer Introduces The Reimagined Track 1 Endurance Edition 24h Chronograph, Ready To Time The 24 Hours of Le Mans Speaking of Porsche, especially unique Porsche’s, there’s no other name you need to know other than Singer. The Californian company takes already awesome Porsche models from the late 80s and early 90s, strip them to their core and restore it to the perfect Porsche, incorporating the best aspect of every generation into bespoke cars that have taken the world by storm. Everybody wants one. Not everybody can afford the rumoured $1 million price tag.
What you might not have known is that Singer makes watches and their latest release is the Track 1 Endurance Edition 24h Chronograph to mark their involvement with the Hertz Team JOTA at the 24h of Le Mans this year.
The new version of the Track 1 is going head on into performance and weigh saving. It is made of titanium and uses the openworked case introduced in the Track1 DLS ( Engineering). The 43mm case, with black-coated bezel, crown and pushers, has been matte finished and coated in golden ZRN. The display of the classic Track 1 has been further developed to enable a dedicated 24-hour chrono function. And to provide the best possible legibility of the time indications, this chronograph is equipped with jumping hours and minutes and a sweeping seconds hand.
Inside nothing much has changed - it’s still the same ultra-complex, ultra-innovative movement as previous editions of the Track1 - the AgenGraphe made by Swiss movement maker Agenhor. The watch comes on a perforated rubber strap closed by a deployant buckle.
Limited to 24 pieces, the Singer Reimagined Track 1 Endurance Edition 24h Chronograph is now available for pre-order from the brand’s website and priced at CHF 70,000 (excl. taxes).
6/ Newly Appointed Bremont CEO Gives First Interview, Talks Brand Direction And Overcoming Existing Challenges Just a few weeks ago, Bremont announced they were appointing legendary watch executive Davide Cerrato as new CEO. Cerrato is perhaps best known for his tenure at Tudor where he introduced the Black Bay line. Just yesterday he gave an interview to Hodinkee and I want to link to it here as I think it’s a great read if you’re a fan of Bremont. He talks all sorts of stuff - his love for cars and watches, what the recent $59 million investment into Bremont means, his vision for the future, the challenges of finding a "hero product" for the brand, and how to bring "made in England" around the world.
-------------------------------------------------------------
On hand - a selection of reviews
1/ Hands-On With The Bremont MBII Anti-Shock Pilot’s Watch 2/ A Review Of The Damasko DC86 Orange Black -------------------------------------------------------------
Watch Worthy - A look at an offbeat, less known watch you might actually like
Wilbur Watch Co. LEO, an Area 51 Inspired Watch with a Unique Jumping Hour Display The LEO, on the one hand, seems wildly impractical at its stated dimensions. And this is obviously an aesthetic that is tough to integrate into an everyday style for most people. But that, as with so many independently made watches that border on the experimental, mechanical art side of the spectrum, is where the charm is. The LEO is probably not an everyday watch, it’s a watch for curious and adventurous watch lovers to pull out of the box when they feel like conjuring a particular mood, maybe after an X-Files binge.
-------------------------------------------------------------
People loved the PRX giveaway! That's why I'm doing a new one. This time, we're giving away three Seiko Alpinists in that lovely green. Head on
over to the newsletter if you would like to enter the giveaway.
If you would like to receive some additional watch-adjacent content, as well as this news overview, every morning Monday-Friday in the form of a newsletter
feel free to subscribe. However, there is absolutely no need for you to subscribe, as all the news from the newsletter is posted here. It is only if you want to receive a couple of daily links that are not strictly watch-related and want to get this news overview in your inbox.
submitted by
dreftzg to
Watches [link] [comments]
2023.05.25 02:02 blubellebunny Opinions
| Hey all, first project. The first picture is the piece I started with and the second picture is it almost finished. Just have the top coat to go. 1) What do you all think about the second picture? I wanted to brighten things up. 2) I used a chalk spray paint for the green. What should I use for top coat to protect it? I saw someone use rust oleum matte spray paint. Is that a good option? submitted by blubellebunny to woodworking [link] [comments] |
2023.05.24 22:09 Top-Introduction-913 Newly retired and doing some DYI PROJECTS
| I will include a photo of desired look in the comments. I want to refinish in the next photo. I have lightly hand sanded the front side, and I am not sure what to do with the back side. Questions: 1. Do I need to do more sanding? 2. Do I need to apply a stain or paint? 3. What type of finish, glass matte, semi? 4. What paint, latex, water-base, spray paint? 5. I know there are different kinds of wood involved here, can they all be treated the same? 6. I most likely will be placing a sheet of glass over the top I am a recently retired 30 year vocational technical teacher. This is normally something I would consult with my coworkers about. Thank you for your thoughts and your time. submitted by Top-Introduction-913 to woodworking [link] [comments] |
2023.05.24 11:10 VADANIASHOP Choosing the Right Door Stopper: A Guide for Homeowners
I. Introduction As a homeowner, ensuring the safety and security of your family is of utmost importance. One often overlooked aspect of home security is door control, and a crucial component in this regard is the
door stopper. Door stoppers play a vital role in preventing unwanted entry, protecting your loved ones, and maintaining a secure environment within your home. In this comprehensive guide, we will explore the significance of selecting the right door stopper for your specific needs and offer valuable insights to help you make an informed decision.
At VADANIA, we understand the importance of reliable door control solutions. Our wide range of high-quality door stoppers combines functionality, durability, and aesthetic appeal to meet the diverse needs of homeowners. With our commitment to excellence and customer satisfaction, we aim to provide you with the peace of mind you deserve.
The Role of Door Stoppers in Home Security 📷
Before delving into the selection process, it is crucial to recognize the essential role that door stoppers play in enhancing home security. These small but mighty devices serve as an added layer of defense against potential intruders. By effectively preventing unauthorized access, door stoppers help safeguard your home, giving you and your family a sense of protection and tranquility.
Understanding Different Types and Functions of Door Stoppers Not all door stoppers are created equal, as they come in various types, each designed to cater to specific requirements. Let’s explore some popular options available on the market:
- Solid Stainless Steel Heavy Door Stopper
Our solid stainless steel heavy door stopper is engineered to withstand the weight and force of heavy doors. Crafted from premium materials, it ensures robustness and longevity, making it an ideal choice for doors that require extra support and stability.
- 3-Inch High Door Stopper with Rubber Head
If noise reduction and impact absorption are your primary concerns, our 3-inch high door stopper with a rubber head is the perfect solution. The rubber head provides excellent shock absorption, effectively minimizing noise and preventing damage to both the door and the wall.
- Drilled or Non-Drilled Door Stops: Versatile Options
For ultimate convenience, our door stopper sets offer you the choice between drilled and non-drilled options. The drilled door stops provide a permanent and secure installation, while the non-drilled ones offer flexibility and ease of use, allowing you to move them as needed.
- Oval Floor-Mounted Half Moon Door Stop with Screws and Superglue
For a sleek and stylish option, our oval floor-mounted half moon door stop adds a touch of elegance to any interior. With its secure installation using screws and superglue, it ensures reliable door control while seamlessly blending with your home decor.
In the upcoming sections, we will delve deeper into the key factors to consider when selecting the most suitable door stopper for your specific requirements. From the weight and material of your doors to the desired style and decorative elements, we will provide you with valuable insights to guide you towards making an informed choice.
II.Home Security and Door Control 📷
When it comes to ensuring the safety and security of your home, proper door control plays a vital role. Door stoppers, as simple as they may seem, are an essential component of home security measures. In this chapter, we will explore why door stoppers are crucial for homeowners and how they contribute to enhancing home security.
Importance of Door Stoppers in Home Security Home security is a top priority for every homeowner, and door control is an integral part of it. Door stoppers provide several key benefits in safeguarding your home:
- Preventing Unauthorized Access: Door stoppers act as a barrier, preventing unauthorized individuals from easily entering your home. They add an extra layer of protection by restricting the opening of doors beyond a certain point.
- Burglary Deterrence: Visible door stoppers send a clear message to potential intruders that your home is well-secured. They act as a deterrent, making burglars think twice before attempting a break-in.
- Protection against Forced Entry: High-quality door stoppers can withstand considerable force, making it difficult for intruders to kick in or force open a door. They provide added resistance against forced entry attempts.
- Childproofing: Door stoppers also contribute to childproofing your home. By limiting the door swing, they prevent doors from accidentally closing on children’s fingers, ensuring their safety.
The Role of Door Stoppers in Enhancing Home Safety Door stoppers not only provide security benefits but also contribute to overall home safety. Here’s how they enhance safety within your home:
- Preventing Door Slamming: Door stoppers with rubber heads absorb the impact and prevent doors from slamming shut. This feature eliminates the risk of doors closing abruptly, which can cause injuries and accidents.
- Minimizing Noise: By controlling the door swing, door stoppers reduce noise caused by doors hitting walls or furniture. This is especially beneficial in homes with active family members or in environments that require a quieter atmosphere.
- Avoiding Wall Damage: Without door stoppers, doors swinging freely can collide with walls, causing unsightly marks and damage. Door stoppers protect your walls from dents, scratches, and other forms of wear and tear.
III. Types and Functions of Door Stoppers When it comes to door stoppers, there are various types available on the market, each designed to serve specific purposes and meet different needs. Understanding the different types and their functions can help homeowners make an informed decision when choosing the right door stopper for their homes.
A. Solid Stainless Steel Heavy Door Stopper One popular type of door stopper is the solid stainless steel heavy door stopper. This type of door stopper is known for its durability and strength, making it ideal for heavier doors. Whether you have a solid wood door or a metal door, the solid stainless steel heavy door stopper can effectively hold it in place and prevent it from swinging open or closing unexpectedly. Its robust construction ensures that it can withstand frequent use and provide long-lasting performance.
B. 3-Inch High Door Stopper with Rubber Head For homeowners looking for a door stopper that offers shock absorption and noise reduction, the 3-inch high door stopper with a rubber head is an excellent choice. The rubber head acts as a buffer, preventing the door from making loud banging sounds when it comes into contact with the stopper. Additionally, the 3-inch height provides ample clearance for most doors, ensuring that they stay securely in place without damaging the floors or walls. This type of door stopper is suitable for regular doors and is particularly useful in residential settings where noise reduction is desired.
C. 2-Packs Choice of Drilled or No-Drilled Door Stops The 2-packs door stoppers offer homeowners flexibility in terms of installation. These door stoppers are available in two options: drilled or no-drilled. The drilled door stoppers come with pre-drilled holes, making installation quick and hassle-free. On the other hand, the no-drilled door stoppers can be installed without drilling any holes, thanks to their adhesive backing. This option is ideal for those who prefer not to make permanent alterations to their doors or for renters who want a temporary solution. Both options provide reliable door control and prevent doors from slamming shut.
D. Oval Floor-Mounted Half Moon Door Stop with Screws and Superglue Another type of door stopper worth considering is the oval floor-mounted half moon door stopper. This particular design offers a combination of functionality and aesthetics. It is typically installed on the floor, preventing the door from hitting the wall and causing damage. The oval shape and sleek finish give it a modern and stylish appearance. This door stopper comes with screws and superglue for secure and stable installation. It is an excellent choice for homeowners who want to add a touch of elegance to their interior while effectively controlling their doors.
IV. Key Considerations for Choosing the Right Door Stopper Choosing the appropriate door stopper requires careful consideration based on various factors. By taking into account the following key points, homeowners can make an informed decision that suits their specific needs and preferences.
A. Door Weight and Material 📷
The weight and material of the door play a crucial role in selecting the right door stopper. Consider the following:
- Heavy Doors: For heavy doors such as solid wood or metal doors, a solid stainless steel heavy door stopper is recommended. These robust stoppers provide the necessary strength and stability to prevent the door from slamming shut or causing damage.
- Standard Doors: Standard doors made of materials like wood or composite often require a door stopper with a rubber head. The rubber head absorbs impact and prevents noise, ensuring a quiet and gentle door closure.
B. Installation Location and Requirements The location where the door stopper will be installed and any specific requirements should be taken into account. Here are some factors to consider:
- Interior Doors: For interior doors, such as bedroom or bathroom doors, a 3-inch high door stopper with a rubber head is typically suitable. This type of stopper is designed to prevent door handles from damaging the wall when opened forcefully.
- Exterior Doors: When selecting a door stopper for exterior doors, consider the weather conditions and potential exposure to moisture. Stainless steel door stoppers with corrosion-resistant properties are ideal for such situations.
- Special Needs: If there are specific requirements, such as childproofing or pet safety, consider door stoppers with additional features like height adjustment or childproof locking mechanisms.
C. Style and Decor Door stoppers can also contribute to the overall aesthetic appeal of a room. Consider the following aspects:
- Finish and Design: Choose a door stopper finish that complements the existing hardware and decor in your home. Options may include polished stainless steel, brushed nickel, or matte black finishes.
- Matching Door Style: Consider the architectural style of your doors and select door stoppers that blend seamlessly with the overall design. For example, sleek and minimalist door stoppers work well with modern or contemporary doors, while ornate or decorative stoppers may suit traditional or vintage-style doors.
V. Installation and Maintenance Tips for Door Stoppers Proper installation and maintenance of door stoppers are crucial to ensure their effectiveness and longevity. In this chapter, we will provide you with essential tips and guidelines for installing and maintaining door stoppers. By following these instructions, you can maximize the functionality and lifespan of your chosen door stopper.
Installation Steps and Requirements
- Preparation: Before installing the door stopper, gather the necessary tools and materials, including a measuring tape, screws or adhesive (depending on the type of door stopper), a screwdriver or drill, and a level.
- Determine the Installation Location: Identify the optimal placement for your door stopper. Consider factors such as the type of door, the direction it swings, and the desired stopping position.
- Measure and Mark: Measure the distance from the floor to the desired stopping point on the door. Use a pencil or marker to mark this spot on the wall or floor.
- Drilling Holes (if applicable):
- For door stoppers that require drilling, use the appropriate drill bit size based on the manufacturer’s instructions.
- Drill pilot holes into the marked spot on the wall or floor. Ensure the holes are straight and deep enough to securely anchor the door stopper.
- For drilled door stoppers: Align the door stopper with the drilled holes and secure it in place using screws provided. Use a screwdriver or drill to tighten the screws, ensuring a firm attachment.
- For adhesive-based door stoppers: Remove the adhesive backing, align the door stopper with the marked spot, and press it firmly against the surface, applying steady pressure for a few seconds to ensure proper adhesion.
- Check Alignment and Stability: Use a level to verify that the door stopper is installed evenly and straight. Ensure it is securely attached and stable.
Maintenance and Care Guidelines To maintain the functionality and appearance of your door stopper, follow these maintenance tips:
- Regular Cleaning: Clean the door stopper periodically to remove dust, dirt, or debris that may affect its performance. Use a soft cloth or sponge and mild soapy water to wipe the surface of the door stopper. Avoid using harsh chemicals or abrasive materials that could damage the finish.
- Inspect for Damage: Regularly inspect the door stopper for any signs of wear, damage, or loose components. If you notice any issues, promptly address them to prevent further damage or compromised performance. Replace damaged parts or the entire door stopper if necessary.
- Lubrication: Apply a small amount of lubricant, such as silicone spray or graphite powder, to the moving parts of the door stopper, if applicable. This helps maintain smooth operation and prevents squeaking or sticking.
- Adjustment: Periodically check the door stopper’s position and adjust if necessary. Over time, the door or floor might shift, affecting the door stopper’s effectiveness. Ensure the door stopper aligns properly with the door and provides sufficient clearance when in use.
- Protective Measures: Take precautions to protect the door stopper during activities that could potentially damage it. For example, when moving furniture or heavy objects, place padding or protective barriers to prevent accidental impact.
- Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s instructions and guidelines specific to your door stopper model for any additional maintenance recommendations or precautions.
By following these installation and maintenance tips, you can ensure that your door stopper remains in optimal condition, providing reliable door control and protection for your home.
Remember, a well-installed and properly maintained door stopper enhances home security, prevents damage to walls.
VI. Conclusion 📷
In conclusion, choosing the right door stopper is a crucial decision for homeowners. Door stoppers not only enhance the security of your home but also provide convenience and peace of mind. Throughout this guide, we have explored the different types and functions of door stoppers, as well as key considerations when selecting the most suitable one for your needs.
Firstly, we discussed the importance of home security and how door stoppers play a vital role in preventing intrusions and protecting your loved ones. By acting as a physical barrier, door stoppers act as a first line of defense, deterring potential burglars and ensuring the safety of your household.
We then examined various types of door stoppers and their specific features. The solid stainless steel heavy door stopper offers exceptional durability and strength, making it ideal for heavier doors that require robust support. On the other hand, the 3-inch high door stopper with a rubber head provides shock absorption and noise reduction, perfect for regular doors in residential settings. We also explored the versatility of the 2-piece door stopper set, which offers the option of drilled or non-drilled installation, catering to different preferences and requirements. Additionally, the floor-mounted half-moon door stoppers were highlighted for their aesthetic appeal and functional design, making them an excellent choice for those seeking both style and practicality.
When it comes to choosing the right door stopper, several factors should be considered. The weight and material of the door play a significant role in determining the appropriate door stopper type. Additionally, factors such as the installation location and specific needs of the door should be taken into account. It is also worth noting that door stoppers can contribute to the overall style and decor of your home, allowing you to select options that seamlessly blend with your interior design.
To ensure a successful installation and optimal performance, we provided valuable tips on the installation and maintenance of door stoppers. Following the recommended installation steps and adopting proper maintenance practices will help extend the lifespan and functionality of your chosen door stopper.
At VADANIA, we are dedicated to providing high-quality door stoppers that meet the diverse needs of homeowners. Our range of products offers durability, functionality, and style, ensuring that you can find the perfect door stopper for your home. With a focus on innovation and customer satisfaction, VADANIA continues to deliver reliable solutions that enhance both security and aesthetics.
In conclusion, selecting the right
door stopper is an essential step in safeguarding your home and adding convenience to your daily life. By considering the weight and material of your door, installation requirements, and your personal preferences, you can make an informed decision that meets your specific needs. Trust in VADANIA to provide top-notch door stoppers that combine quality craftsmanship and functional design, allowing you to create a secure and stylish environment for you and your family.
submitted by
VADANIASHOP to
woodworkwithslides [link] [comments]
2023.05.24 00:27 Mkplover [SELL] [US ONLY] Lots of brand new & Gently used items! KVD, Urban Decay, Too Faced, Hourglass, Jeffree Star Cosmetics, Tarte, Wander Beauty and etc.
submitted by
Mkplover to
makeupexchange [link] [comments]